Corian Tables in Cairo
A laminate table top in a busy Cairo restaurant lasts roughly two to three years before the surface peels at the edges, the joins open under repeated mopping, or a hot plate leaves a blister that no cleaning agent can fix. Replacing it means downtime, a fabrication order, and the same failure cycle beginning again. Corian solid surface breaks that cycle at the material level, not the maintenance level.
Cairo House EG supplies and installs JAICAN acrylic solid surface tables across Cairo for restaurants, cafes, clinics, hotels, offices, and retail fit-outs. Fabrication, delivery, and on-site installation come under one contract, with physical colour samples, site measurement, and a material warranty included as standard.
WHY CAIRO HOUSE EG
Cairo House EG has been operating in the Cairo construction materials market since 2015 as Egypt’s exclusive distributor of JAICAN acrylic solid surface sheets and LAVADO colour-matched adhesive and sinks. That exclusivity matters practically: when a client specifies a JAICAN colour across a 40-table restaurant fit-out, Cairo House EG can fulfil the order from the same production batch, guaranteeing colour consistency across every surface. When something requires attention post-installation, one team manufactured it, installed it, and stands behind it. The full background on Cairo House EG’s history and credentials is on the About page.
The New Nozha showroom is the operational base for projects across Heliopolis, Nasr City, New Cairo, Maadi, New Nozha, and the wider greater Cairo corridor, covering restaurant, clinic, corporate, and hotel lobby fit-outs.
WHAT JAICAN SOLID SURFACE DELIVERS
JAICAN acrylic solid surface is homogeneous through its full thickness: colour and composition are consistent from face to back, not applied to a separate substrate. Surface scratches sand out without exposing anything underneath. Joins between sheets are bonded with LAVADO colour-matched adhesive and thermoformed until the seam is invisible.
Sheet thicknesses are 6mm, 12mm, and 20mm. For dining table tops, 12mm is the standard commercial specification. For heavy-use surfaces in hotel lobbies, hospital reception counters, and gym reception desks, 20mm adds impact resistance and visual weight. The 6mm sheet is reserved for curved panels and wall cladding.
Finishes are matte or polished. Matte is the practical default for food-service environments: it minimises visible scratching from cutlery and tolerates cleaning chemicals without surface degradation. Polished finishes suit hotel lobbies and high-end retail where the brief is visual impact.
The JAICAN colour range covers more than 120 options: pure whites, warm creams, neutral greys, deep charcoals, and veined stone patterns that replicate marble without the structural and logistical complexity of natural stone. The same JAICAN sheet used for table tops is available in full Corian countertops configurations for kitchen, lab, and office surfaces. Paired with Corian vanity units, a single colour run can cover dining tables, counters, and bathroom surfaces across an entire fit-out in one seamless specification.
The non-porous surface resists staining: coffee, red wine, and cleaning agents wipe clean without penetrating the substrate. Heat tolerance covers brief contact up to 100°C, which handles the everyday load of plates, cups, and teapots. A pot rest handles sustained high-temperature exposure above that point.
CORIAN SOLID SURFACE TABLES VS. THE ALTERNATIVES
| Feature | Corian Solid Surface | Granite | Laminate | Stainless Steel |
|---|---|---|---|---|
| Durability | Excellent; surface scratches repairable on site | Excellent; chips at edges | Moderate; peels/blisters w/ heat | Excellent; dents visibly |
| Heat Resistance | Up to 100°C brief contact | High | Low; blisters above 60°C | Very high |
| Customization | Any dimension, edge profile, and colour | Limited by natural slab size | Standard sheet sizes only | Complex shapes require welding |
| Maintenance | Wipe clean; sand out scratches on site | Annual sealing required | Wipe only; damaged sections replaced | Wipe; scratching accumulates |
| Seamless Joins | Yes; thermoformed, invisible bond | No | No | Welded seam remains visible |
| Cost (Cairo) | Mid-range; lower total lifecycle cost | High material and import cost | Low upfront; high replacement rate | High fabrication and finishing cost |
COMMERCIAL APPLICATIONS ACROSS CAIRO
Restaurants and cafes account for the highest volume of solid surface table orders. In Heliopolis and Nasr City, where high-footfall dining premises operate across multiple sittings daily, operators specify 12mm matte JAICAN for both table tops and bar counters to deliver a coherent interior that holds up through a full five-year fit-out cycle without replacement.
Clinics and hospitals in Maadi and New Cairo specify solid surface for its disinfection compatibility. A non-porous surface cleaned repeatedly with clinical-grade agents does not degrade, absorb, or develop the micro-crevices that harbour bacteria. Waiting-area tables, nurse stations, and treatment-room counters are the standard applications; the seamless thermoformed joins eliminate the crevice problem that grouted and multi-piece surfaces cannot.
Hotel lobbies and corporate offices across New Nozha and greater Cairo specify polished 20mm JAICAN for lobby tables paired with reception desk cladding in the same colour run. The visual result sits beside genuine marble; the structural load and installation complexity do not. To see how solid surface tables fit within larger fit-out environments, the completed solid surface installations gallery includes restaurant, clinic, and hotel lobby projects across Cairo.
For full fit-out projects that include restrooms, Cairo House EG also supplies and installs Corian bathroom partitions, allowing one supplier to cover every surface category on the project. Where a lower-cost partition specification is required, HPL compact partitions are available as a durable alternative within the same project scope.
FIVE POINTS TO CONFIRM BEFORE PLACING A FABRICATION ORDER
Specifying the wrong configuration creates problems that are expensive to correct after fabrication has started. Work through the following before signing off the order.
Thickness. 12mm covers standard dining and meeting-room applications. 20mm is the correct specification for heavy commercial surfaces. Under-specifying creates a surface that flexes and stresses the joins.
Edge profile. Bullnose and rounded profiles handle repeated corner contact from chairs and service trolleys better than square-cut or bevelled edges, which look cleaner but chip more readily under impact.
Colour samples. Always review physical JAICAN swatches before committing to a production run. Screen renderings are unreliable, particularly for veined and stone-effect patterns.
Lead time. Standard orders deliver in 7 to 14 working days. Volume orders of ten or more tables need 3 to 4 weeks for full production and phased delivery.
Installer credentials. Solid surface requires specific tooling, adhesive technique, and thermoforming knowledge. Confirm that the installation team is trained directly on the material. Cairo House EG fabricates and installs under one contract, which removes the handover gap between workshop and site.
VISIT THE SHOWROOM
Cairo House EG operates 24/7 from the New Nozha showroom. JAICAN colour samples are available for inspection on request.
Address: 3 ش مصر للطيران مربع 1314 عمارات الطيران المدني بجوار السندباد النزهه الجديده, Cairo Governorate 11843
Get Directions: Open the address above in Google Maps, or call +201066672094 before visiting to confirm sample availability.
FREQUENTLY ASKED QUESTIONS
What is the lead time for a custom Corian table order in Cairo?
Standard fabrication and delivery is 7 to 14 working days for most custom table top orders. Volume orders of ten or more units should allow 3 to 4 weeks, particularly where phased site delivery is required to align with a construction programme.
What does the installation process involve?
The Cairo House EG team measures the site, fabricates the tops in the workshop to the confirmed dimensions and edge profile, delivers to site, bonds joins with LAVADO colour-matched adhesive, and finishes the surface on site. Most commercial table runs for a standard restaurant fit-out are completed in a single working day.
What warranty comes with a solid surface table installation?
Cairo House EG provides a manufacturer-backed warranty covering structural integrity and colour stability under normal commercial use. Terms and duration are confirmed at order stage; contact the sales team for the specifics applicable to your project.
Is there a minimum order quantity?
No fixed minimum. Single tops are available at a higher per-unit cost; bulk pricing applies from ten units.
Which areas does Cairo House EG deliver and install to?
The installation team covers Heliopolis, Nasr City, New Cairo, Maadi, New Nozha, and the wider greater Cairo area. For projects outside these districts, contact the team to confirm logistics and lead time.
How does solid surface perform against the heat loads of a working restaurant?
JAICAN handles brief contact up to 100°C without damage, covering hot plates, coffee cups, and teapots. Use a pot rest for sustained high-heat exposure above that point. The surface will not blister or delaminate the way laminate does under the same conditions.
What customization options are available for Corian table tops?
Any plan dimension, including curved and L-shaped forms. Edge profiles: square, bevelled, bullnose, ogee. Over 120 JAICAN colours spanning whites, greys, blacks, and stone-effect patterns. Integrated LAVADO sinks are available for service counter configurations requiring a seamless combined surface.
How do you maintain a solid surface table in a commercial environment?
Daily cleaning requires a damp cloth and a mild detergent. Avoid abrasive pads on polished finishes. Light scratches sand out with a fine-grit pad and surface polish, with no specialist visit or panel replacement required.
GET A QUOTE FOR YOUR CAIRO PROJECT
To specify JAICAN solid surface tables for any commercial fit-out in Cairo, contact the Cairo House EG team for material advice, physical colour samples at no cost, and a full fabrication and installation quote based on your confirmed site dimensions.
Call: +201066672094 or +201223111265
Email: info@cairohouseeg.com
Website: https://cairohouseeg.com/
كايرو هاوس – قواطيع حمامات كوريان و كومباكت HPL و ارضيات مرتفعة
3 ش مصر للطيران مربع 1314 عمارات الطيران المدني بجوار السندباد النزهه الجديده, Cairo Governorate 11843
+201066672094 · +201223111265
info@cairohouseeg.com | https://cairohouseeg.com/
Open 24/7 · Since 2015