Compact HPL Partitions in Haram, Cairo

Haram Street runs from Giza up to the Pyramids plateau, and almost everything along it serves visitors. Hotels line the road, the Mena House sits at the top, the Grand Egyptian Museum has reshaped the whole approach, and restaurants and coach stops handle tour groups arriving in waves. Washrooms here take international visitors and have to look the part. Cairo House EG supplies and installs compact HPL partitions across the district.

CoveringHaram Street, Pyramids plateau, Mena House, Maryotia
Panel12mm and 13mm UNISCE compact HPL
Typical jobHotel and tourism venue washrooms
Compact HPL colour swatch fan spread open at Cairo House in New Nozha, Cairo, showing solid shades from yellow to deep red and grey. Clients choosing Compact HPL in Cairo use this fan to match panel finishes for interior fit out projects.

What compact HPL partitions are, and why Haram venues specify them

Compact HPL is high pressure laminate manufactured as a solid slab rather than a laminate face over a soft core. Kraft paper is saturated in phenolic resin and pressed under heat into one dense homogeneous board, normally 12mm or 13mm for cubicle work. It is waterproof throughout, non porous and repairable at the fitting.

Tourism changes what a washroom has to do. A hotel or restaurant on Haram Street is judged by visitors who compare it to venues elsewhere in the world, and a washroom is where that judgement gets made quickly and unfairly. At the same time the traffic is brutal, because coach groups arrive together and use the facilities within a fifteen minute window before moving on.

That pairing, appearance and surge load, is exactly what solid panel construction handles. The finish stays consistent because the colour runs through the material rather than sitting on it, and the surge load falls on hinges and latches which are stainless steel 304 and individually replaceable without closing the washroom.

قواطيع حمامات داخل مطعم بتصميم هادئ وتشطيب نظيف، تعطي شكل مرتب لدورات المياه وتناسب الاستخدام اليومي للعملاء، مع خامات مقاومة للمياه وسهلة الصيانة.
Stainless steel 304 partition hardware fitted in Haram

Panel and hardware specification

SpecificationWhat we supply for Haram washrooms
Panel thickness12mm standard cubicles, 13mm for high traffic and public washrooms
CoreSolid phenolic kraft core, waterproof through the full thickness
HardwareStainless steel 304 hinges, indicator locks, brackets, pilaster shoes, coat hooks
Door actionGravity or spring hinges, self closing, adjustable to open or closed rest
Head railAnodised aluminium, continuous over the cubicle run
Floor fixingAdjustable stainless feet, levels out uneven screed
Typical lead time in HaramFive to eight working days after approval
Finishes we move most hereStone textures and warm neutrals for hospitality and tourism venues

Where compact HPL earns its cost in Haram

Hotels

The hotel stock along Haram Street and around the plateau runs washrooms on daily housekeeping rotas that would strip a coated finish inside a year.

Tourism venues

Visitor facilities near the Pyramids and the Grand Egyptian Museum approach handle coach groups arriving together rather than steady traffic.

Restaurants and cafes

Tour group restaurants along Haram Street see an entire evening of use compressed into two sittings, with washrooms judged by international visitors.

Coach stops and rest facilities

Rest stops on the approach roads take heavy short duration surges with almost no recovery time between groups.

Retail and bazaars

Souvenir retail along the plateau approach runs washrooms shared between staff and a constant visitor flow.

Local commercial

Businesses along Maryotia and the lower Haram Street serve residents daily in smaller washrooms with the same durability needs.

Compact HPL cubicle doors and pilasters in a Haram washroom

What we supply and install in Haram

Cairo House EG has supplied construction finishing materials in Cairo since 2015 and holds the exclusive Egypt agency for UNISCE compact HPL panels. Everything below is fabricated and fitted by our own teams rather than subcontracted out.

Washroom cubicle systems

Cubicle systems built from solid grade board, so the door edge is the same material as the face and cannot delaminate. See HPL compact cubicle panels.

Washroom counter tops

Counter surfaces in the same colour family as the cubicles, so the washroom reads as one specification. See compact counter tops.

Partition hinges

Gravity and spring hinges in stainless 304, adjustable to rest open or closed depending on how the washroom is used. See hinge hardware for cubicles.

Adjustable pilaster feet

Pilaster shoes that cover the fixing and keep water away from the base of the panel. See levelling pilaster feet.

Corian fabrication

Solid surface that can be repaired in place by sanding rather than replaced when it gets marked. See solid surface systems.

Reception and bar counters

Countertops repairable in place, which matters over a five to ten year lease. See custom Corian counters.

Toilet partition run under installation in Haram, Cairo

Serving Haram and the Pyramids corridor

We work from El Nozha El Gedida in Heliopolis, and Haram sits across the city on the western approach. That distance means planned programmes rather than same day callouts, with delivery and installation windows agreed before fabrication starts.

On the same corridor we cover Hadayek El Ahram, Faisal, Giza, Imbaba and 6th of October. A contractor or hotel group with several sites across the western side can hand us the whole package.

Traffic on Haram Street is the practical constraint on delivery, particularly during peak visitor hours. We plan vehicle timing at survey stage so panels arrive when the venue can actually receive them. You can also see work we have delivered.

Compact HPL panel edge and head rail detail, Haram

What to expect when you work with us

Most washroom packages fail at measurement, not installation. Our process removes that risk before a single panel is cut.

  1. Site survey. We measure the built washroom in Haram rather than working from the drawing, because wall plumb, floor level and drainage falls on site rarely match what was issued.
  2. Layout and panel selection. You receive a cubicle layout with door swings and clear widths marked, plus physical panel samples so the colour is approved under your own lighting instead of on a screen.
  3. Quotation. Itemised by panel, hardware and installation, so you can see what is being priced and adjust the specification if the budget needs it.
  4. Fabrication. Panels are cut, edge finished and drilled to the approved layout. Sheets stay under factory film until they reach site.
  5. Installation. Our fitters set out, install head rails, pilasters and doors, then adjust every hinge and latch before handover. Hotel and restaurant work is scheduled around guest and group arrival patterns.
  6. Handover and after sales. We walk the finished washroom with you, hand over spare hardware, and stay reachable for adjustments once the space is in real use.
Cairo House EG washroom fit out in Haram, Cairo
Finished compact HPL cubicles handed over in Haram

Find Us on Google Maps

Get Directions →

Frequently Asked Questions

Our washroom is judged by international guests. Can this look genuinely good? Yes. The range includes stone textures, woodgrains and deep solids rather than only clinical whites, and because there are no visible joints or grout lines the finished room reads as one considered surface.

Coach groups arrive all at once. Does that change the specification? It does. Surge use is harder on hinges and latches than steady traffic, so for tourism venues we specify 13mm panels with self closing hinges rated for public washroom duty.

How does the finish hold up under daily housekeeping cleaning? Very well. There is no coating or sealant to strip, so daily commercial cleaning removes soiling rather than gradually removing the finish, and the surface does not dull.

Can you work around hotel occupancy and group schedules? Yes. We agree the working window at survey and phase the installation washroom by washroom so the venue never loses all its facilities at once.

What thickness suits a hotel or tourism washroom? 13mm for public facing washrooms taking group traffic. 12mm is sufficient for staff washrooms and back of house areas and costs less.

Is the stainless hardware included? Yes. Hinges, indicator locks, brackets, pilaster shoes and coat hooks in stainless steel 304, supplied as one matched set with spares handed over at completion.

How long does the process take from approval? Five to eight working days for fabrication after layout and colour approval, then normally one to two days on site for a standard four to six cubicle run.

What does a compact HPL partition cost in Haram? It depends on thickness, colour, cubicle count and hardware. Send the layout or the cubicle count and we return an itemised quotation.

Get a quote for your Haram project

Send the washroom layout or the cubicle count and rough dimensions and we will return an itemised quotation. We will bring the swatch fan so the finish is judged in your own lighting.

Site visits along Haram Street are planned around visitor traffic and venue schedules. To book a site survey, call or message us any time.

Phone: +201066672094 or +201223111265
Website: cairohouseeg.com
Hours: Open 24 hours, 7 days a week
Address: 3 Misr Lel Tayaran Street, Block 1314, Civil Aviation Buildings, next to Sindbad, El Nozha El Gedida, Cairo 11843