Compact HPL Partitions in Dokki, Cairo
Dokki packs government offices, research institutes, clinics and restaurants into a small grid. Mesaha Square, Tahrir Street, the National Research Centre, the Agricultural Museum and the run of medical practices along Mohi El Din Abou El Ezz all sit within a few minutes of each other, and the Dokki metro station feeds constant foot traffic through the district. Cairo House EG supplies and installs compact HPL partitions across all of it.
What compact HPL partitions are, and why Dokki buildings need them
Compact HPL is high pressure laminate produced as a solid board. Layers of kraft paper are saturated in phenolic resin and pressed under heat until they fuse into a single dense sheet, normally 12mm or 13mm for cubicle work. The board carries its own load, so there is no metal frame to corrode and no absorbent core to swell.
The building stock in Dokki makes this decision easy. Most commercial space here sits inside blocks built decades ago, where washrooms are small, internal and poorly ventilated. Moisture stays in the room. Any partition with a particle or timber core in that environment lifts at the base within a couple of years, and once it lifts the door cannot be repaired.
The second reason is space. Dokki washrooms are tight, often carved out of a corridor or a converted storeroom. Compact panels are self supporting, which means you do not lose usable width to a frame or a stud wall. In a room where every centimetre decides whether a cubicle door can open, that is not a detail, it is the whole design.
Panel and hardware specification
| Specification | What we supply for Dokki washrooms |
|---|---|
| Panel thickness | 12mm standard cubicles, 13mm for high traffic and public washrooms |
| Core | Solid phenolic kraft core, waterproof through the full thickness |
| Hardware | Stainless steel 304 hinges, indicator locks, brackets, pilaster shoes, coat hooks |
| Door action | Gravity or spring hinges, self closing, adjustable to open or closed rest |
| Head rail | Anodised aluminium, continuous over the cubicle run |
| Floor fixing | Adjustable stainless feet, levels out uneven screed |
| Typical lead time in Dokki | Five to eight working days after approval |
| Finishes we move most here | Plain white and light grey for institutional and medical interiors |
Where compact HPL earns its cost in Dokki
Government and institutional
The offices around Mesaha Square and Tahrir Street run washrooms that serve staff and visiting public daily, with maintenance budgets that reward a system nobody has to refinish.
Research and education
The National Research Centre and the institutes nearby need surfaces that tolerate cleaning chemicals stronger than anything a normal washroom sees.
Clinics
The medical practices along Mohi El Din Abou El Ezz and Sudan Street work in small rooms where a seamless non porous panel is far easier to keep clinically clean than tiled walls with grout.
Restaurants and cafes
Dokki restaurant washrooms are usually the smallest room in the building, which makes millimetre accurate fabrication the difference between a door that opens and one that does not.
Offices
Older Dokki office blocks repeat the same small core washroom on every floor, so one surveyed and approved detail can cover the entire building.
Transit adjacent retail
Shops and services around Dokki metro station take steady all day footfall, which loads hinges and latches far harder than the size of the washroom suggests.
What we supply and install in Dokki
Cairo House EG has supplied construction finishing materials in Cairo since 2015 and holds the exclusive Egypt agency for UNISCE compact HPL panels. Everything below is fabricated and fitted by our own teams rather than subcontracted out.
Compact HPL toilet partitions
Complete partition runs cut to your layout, including urinal screens, head rails and adjustable stainless feet. See compact partition boards.
Hooks and door bumpers
Coat hooks fixed through the panel properly rather than surface stuck, so they survive being leaned on. See cubicle door hooks.
Raised access flooring
Access floor panels and pedestals installed to the finished floor level agreed at survey. See access flooring range.
Corian and solid surface
Seamless acrylic solid surface for reception counters, clinical surfaces and food service areas. See Corian and solid surface work.
Solid surface vanities
Solid surface vanity units built as one continuous piece, which is the detail that makes a washroom easy to clean. See solid surface vanity tops.
Corian washroom work
Bathroom surfaces specified where hygiene audits apply and tiled detailing will not pass. See Corian washroom surfaces.
Serving Dokki and the west bank districts
We are based in El Nozha El Gedida in Heliopolis and cross to Dokki regularly. It is a genuine cross city run, so we plan surveys and deliveries around the traffic rather than promising windows we cannot hold. What that means for you is a realistic fitting date rather than an optimistic one that slips.
From the same base we cover Mohandessin, Agouza, Giza, Manial and Zamalek, which sit close enough to Dokki that a crew working one can reach another the same day.
Older Dokki blocks often have narrow stairwells, small lifts and no loading access. We record that at survey and size the panels and the delivery around the building, because a sheet that will not fit up the stairs is a wasted trip for both of us. You can also see the full materials catalogue.
What to expect when you work with us
Most washroom packages fail at measurement, not installation. Our process removes that risk before a single panel is cut.
- Site survey. We measure the built washroom in Dokki rather than working from the drawing, because wall plumb, floor level and drainage falls on site rarely match what was issued.
- Layout and panel selection. You receive a cubicle layout with door swings and clear widths marked, plus physical panel samples so the colour is approved under your own lighting instead of on a screen.
- Quotation. Itemised by panel, hardware and installation, so you can see what is being priced and adjust the specification if the budget needs it.
- Fabrication. Panels are cut, edge finished and drilled to the approved layout. Sheets stay under factory film until they reach site.
- Installation. Our fitters set out, install head rails, pilasters and doors, then adjust every hinge and latch before handover. In tight Dokki washrooms the set out is where the job is won or lost.
- Handover and after sales. We walk the finished washroom with you, hand over spare hardware, and stay reachable for adjustments once the space is in real use.
Find Us on Google Maps
Frequently Asked Questions
Our washroom is very small. Is there a minimum size for compact HPL cubicles? There is no practical minimum. Because the panel is self supporting there is no frame or stud wall eating into the space, so you keep more usable width than almost any alternative system. We fabricate to the surveyed opening.
Can you get full size panels up a narrow Dokki stairwell? Usually yes, because we cut to size in the workshop rather than carrying full sheets in. We check access at survey and plan panel sizes around the stairwell and lift dimensions.
Will the panels survive strong cleaning chemicals used in labs and clinics? Yes. The surface takes standard commercial disinfectants and laboratory cleaning agents without dulling, staining or needing resealing. There is no coating on top to strip off.
The washroom has no window and stays damp. Is that a problem? No. Poor ventilation is what destroys partitions with an absorbent core. Compact HPL is waterproof through its full thickness, so persistent humidity has nothing to attack.
Do you work outside office hours in occupied buildings? Yes. Most Dokki refits happen in buildings that stay occupied, so we agree the working window at survey and schedule delivery, cutting and installation around it.
What thickness suits a small Dokki office washroom? 12mm is normally sufficient for office or clinic use. 13mm is worth the extra where the washroom is genuinely public and takes all day footfall, such as ground floor retail near the metro.
Is the stainless steel hardware supplied with the panels? Yes. Hinges, indicator locks, brackets, pilaster shoes and coat hooks in stainless steel 304, supplied as one matched set with spares handed over at completion.
What does a compact HPL partition cost in Dokki? It depends on panel thickness, colour, cubicle count and hardware. Send rough dimensions or a sketch of the room and we return an itemised quotation rather than a rate that shifts later.
Get a quote for your Dokki project
Send the washroom dimensions or a rough sketch of the room and we will return an itemised quotation. If measuring is easier for us to do, we will survey the site.
Site visits across Dokki, Agouza and Mohandessin are arranged within the same week in most cases. To talk to us about the project, call or message us any time.
Phone: +201066672094 or +201223111265
Website: cairohouseeg.com
Hours: Open 24 hours, 7 days a week
Address: 3 Misr Lel Tayaran Street, Block 1314, Civil Aviation Buildings, next to Sindbad, El Nozha El Gedida, Cairo 11843