Compact HPL Partitions in Giza, Cairo
Giza carries one of the heaviest daily footfalls in Egypt. Cairo University moves tens of thousands of students through its faculties, the Giza Zoo and Orman Garden draw families every weekend, Giza Square and the metro station never stop, and the government buildings along the Corniche serve the public all day. Washrooms here are public infrastructure. Cairo House EG supplies and installs compact HPL partitions across the district.

What compact HPL partitions are, and why Giza buildings need them
Compact HPL is high pressure laminate produced as a solid slab rather than a face bonded to a soft core. Kraft paper is saturated in phenolic resin and pressed under heat into one dense homogeneous board, normally 12mm or 13mm for cubicle work. The colour and material run through the full thickness, so damage marks the panel rather than destroying it.
That distinction decides everything in a genuinely public washroom. Cairo University faculty buildings put several hundred people through the same facilities inside a ten minute break, and visitor attractions like the Zoo and Orman Garden concentrate a week of use into a weekend. Under that load a laminated face will eventually be levered or knocked off its core, and once it goes the door is finished.
The second factor is maintenance reality. Public buildings in Giza run with small maintenance teams and limited budgets, so the washroom that stays serviceable is the one where a broken latch is a ten minute swap using a part held in a cupboard, not a supplier order and a closed cubicle for a month.


Panel and hardware specification
| Specification | What we supply for Giza washrooms |
|---|---|
| Panel thickness | 12mm standard cubicles, 13mm for high traffic and public washrooms |
| Core | Solid phenolic kraft core, waterproof through the full thickness |
| Hardware | Stainless steel 304 hinges, indicator locks, brackets, pilaster shoes, coat hooks |
| Door action | Gravity or spring hinges, self closing, adjustable to open or closed rest |
| Head rail | Anodised aluminium, continuous over the cubicle run |
| Floor fixing | Adjustable stainless feet, levels out uneven screed |
| Typical lead time in Giza | Eight to twelve working days after approval for public building quantities |
| Finishes we move most here | Hard wearing dark solids chosen to hide heavy public use |
Where compact HPL earns its cost in Giza
University campus
Cairo University faculty buildings concentrate several hundred users into short breaks, loading door edges, hinges and latches rather than the panel face.
Visitor attractions
The Giza Zoo and Orman Garden take weekend surges far above weekday traffic, with washrooms that must reset quickly between peaks.
Government buildings
Public offices along the Corniche and around Giza Square serve visiting members of the public continuously through working hours.
Transit adjacent commercial
Units around Giza metro station and the square take all day footfall well beyond what their floor area suggests.
Hospitals and clinics
University teaching facilities and the surrounding clinics need non porous seamless surfaces for hygiene compliance.
Schools
Schools across the district face the same concentrated break time pattern as the campus, on a smaller scale but with the same wear.

What we supply and install in Giza
Cairo House EG has supplied construction finishing materials in Cairo since 2015 and holds the exclusive Egypt agency for UNISCE compact HPL panels. Everything below is fabricated and fitted by our own teams rather than subcontracted out.
Compact HPL toilet partitions
Complete partition runs cut to your layout, including urinal screens, head rails and adjustable stainless feet. See our HPL compact partition system.
Corian washroom work
Bathroom surfaces specified where hygiene audits apply and tiled detailing will not pass. See Corian washroom surfaces.
Shower cubicle systems
Shower partitions specified for continuous wet use, with drainage clearance set during the site survey. See wet area shower cubicles.
Wall cladding
Full height panel cladding for wet walls and corridors, a practical alternative to tile and grout. See panel cladding systems.
Indicator locks
Indicator latches that read clearly from a distance, which matters in high traffic public washrooms. See indicator latch sets.
Hooks and door bumpers
Coat hooks fixed through the panel properly rather than surface stuck, so they survive being leaned on. See cubicle door hooks.

Serving Giza and the west bank districts
We are based in El Nozha El Gedida in Heliopolis and cross to Giza regularly. It is a genuine cross city journey, so we build traffic into the schedule and quote installation windows we can hold rather than optimistic ones that slip.
From the same base we cover Dokki, Agouza, Haram, Faisal, Imbaba and Hadayek El Ahram. A programme spanning several west bank sites runs as one package with a single mobilisation.
Public buildings and campuses are governed by access rather than distance. Term dates, opening hours and public access windows shape when work can happen, and we build them into the programme at survey. You can also see our supply and installation service.

What to expect when you work with us
Most washroom packages fail at measurement, not installation. Our process removes that risk before a single panel is cut.
- Site survey. We measure the built washroom in Giza rather than working from the drawing, because wall plumb, floor level and drainage falls on site rarely match what was issued.
- Layout and panel selection. You receive a cubicle layout with door swings and clear widths marked, plus physical panel samples so the colour is approved under your own lighting instead of on a screen.
- Quotation. Itemised by panel, hardware and installation, so you can see what is being priced and adjust the specification if the budget needs it.
- Fabrication. Panels are cut, edge finished and drilled to the approved layout. Sheets stay under factory film until they reach site.
- Installation. Our fitters set out, install head rails, pilasters and doors, then adjust every hinge and latch before handover. In public buildings we phase block by block so facilities are never fully closed.
- Handover and after sales. We walk the finished washroom with you, hand over spare hardware, and stay reachable for adjustments once the space is in real use.


Find Us on Google Maps
Frequently Asked Questions
What actually survives a public washroom with this much traffic? A solid panel and stainless steel 304 hardware. The panel takes impact without a face separating from a core, and the fittings are the only wearing parts, replaceable individually in minutes.
What thickness should a Cairo University or public building washroom use? 13mm. Campus and public buildings are the hardest duty in ordinary construction, and the thicker board absorbs impact at the door edge far better over a long service life.
Our maintenance team is small. Can they handle repairs themselves? Yes, and we set the job up for it. Hinges, latches and brackets are standard stainless steel 304 parts that unbolt and swap without touching the panel, and we leave spares at handover.
Can you phase work across a large campus or public building? Yes. We fabricate in batches against your block release schedule so installation runs continuously and panels are not stored on a live site where they get damaged.
Can you work during term time or public opening hours? Yes where necessary, though breaks and closed days are easier. We phase block by block so a proportion of washrooms stays available throughout.
Does heavy use mean the panels will look worn quickly? The panel surface is far more resistant than a laminated face, and colour runs through the full thickness so scratches do not reveal a different material underneath. We recommend darker solids for the heaviest public duty.
How long does fabrication take for a public building programme? Eight to twelve working days after layout and colour approval for programme quantities. Single washrooms turn faster.
What does a compact HPL partition cost in Giza? It depends on thickness, colour, cubicle count and hardware, and volume affects the rate. Send the washroom schedule or block drawings and we return an itemised quotation.
Get a quote for your Giza project
Send the washroom schedule or the block drawings and we will return an itemised quotation covering the whole programme. If drawings are incomplete we will survey and produce the layouts.
Site visits across Giza are planned around campus and public access windows. To contact us to arrange a survey, call or message us any time.
Phone: +201066672094 or +201223111265
Website: cairohouseeg.com
Hours: Open 24 hours, 7 days a week
Address: 3 Misr Lel Tayaran Street, Block 1314, Civil Aviation Buildings, next to Sindbad, El Nozha El Gedida, Cairo 11843
