Compact HPL Partitions in Garden City, Cairo
Garden City holds a concentration of embassies, five star hotels and medical institutions in a few curving streets. The British and American embassies sit within walking distance of the Four Seasons Nile Plaza, Kasr El Aini Hospital anchors the southern edge, and Simon Bolivar Square feeds the Corniche. Buildings here are held to standards their neighbours are not. Cairo House EG supplies and installs compact HPL partitions across the district.
What compact HPL partitions are, and why Garden City buildings specify them
Compact HPL is high pressure laminate manufactured as a solid board rather than a laminate face on a soft core. Kraft paper is saturated in phenolic resin and pressed under heat until it fuses into one dense homogeneous sheet, normally 12mm or 13mm for cubicle work. The panel is the structure, and the edge is the same material as the face.
Garden City is where written specifications actually get enforced. Diplomatic missions, international hotel operators and teaching hospitals all procure against material standards drafted outside Egypt, and a consultant will ask for evidence rather than a promise. Compact HPL answers on documentation as well as on site, which removes an argument before it starts.
The buildings themselves add a second requirement. Much of Garden City is early twentieth century villas and apartment blocks converted to institutional use, with masonry walls nobody wants to disturb. A self supporting panel system installs inside an existing room without a stud wall, which is often the difference between a refit being approved and being refused.
Panel and hardware specification
| Specification | What we supply for Garden City washrooms |
|---|---|
| Panel thickness | 12mm standard cubicles, 13mm for high traffic and public washrooms |
| Core | Solid phenolic kraft core, waterproof through the full thickness |
| Hardware | Stainless steel 304 hinges, indicator locks, brackets, pilaster shoes, coat hooks |
| Door action | Gravity or spring hinges, self closing, adjustable to open or closed rest |
| Head rail | Anodised aluminium, continuous over the cubicle run |
| Floor fixing | Adjustable stainless feet, levels out uneven screed |
| Typical lead time in Garden City | Five to eight working days after approval |
| Finishes we move most here | Muted neutrals and stone textures suited to hotel and diplomatic interiors |
Where compact HPL earns its cost in Garden City
Embassies and missions
Diplomatic buildings procure against written material standards and need product documentation, not just a sample. Security constraints also shape how and when work happens.
Hotels
The Four Seasons Nile Plaza and the Corniche hotel stock need washroom finishes that photograph well and still survive a commercial housekeeping rota every single day.
Hospitals and medical
Kasr El Aini and the teaching hospital cluster nearby need non porous seamless surfaces that clean down with hospital grade disinfectant without degrading.
Corporate offices
The office floors along the Corniche repeat the same core washroom, so one approved detail can be replicated through a whole building without redesign.
Converted villas
Institutional tenants in converted Garden City villas need washrooms built inside rooms that were never designed for them, without cutting into protected masonry.
Restaurants and clubs
Nile facing venues run heavy evening turnover in compact washrooms where fabrication accuracy decides whether a door swings clear.
What we supply and install in Garden City
Cairo House EG has supplied construction finishing materials in Cairo since 2015 and holds the exclusive Egypt agency for UNISCE compact HPL panels. Everything below is fabricated and fitted by our own teams rather than subcontracted out.
Toilet cubicles and urinal screens
Full cubicle runs in 12mm or 13mm compact HPL, with matching urinal divider screens and anodised aluminium head rails. See compact HPL toilet partitions.
Adjustable pilaster feet
Pilaster shoes that cover the fixing and keep water away from the base of the panel. See adjustable pilaster feet.
Hooks and door bumpers
Coat hooks fixed through the panel properly rather than surface stuck, so they survive being leaned on. See door bumper fittings.
Raised access flooring
Access floor panels and pedestals installed to the finished floor level agreed at survey. See raised flooring installation.
Corian and solid surface
Seamless acrylic solid surface for reception counters, clinical surfaces and food service areas. See the Corian product range.
Solid surface vanities
Solid surface vanity units built as one continuous piece, which is the detail that makes a washroom easy to clean. See seamless vanity units.
Serving Garden City and the central riverside districts
Our workshop is in El Nozha El Gedida in Heliopolis and we come into Garden City regularly. The constraint here is access and security clearance rather than distance, so vehicle details, crew details and delivery windows get agreed before fabrication rather than on the day.
From the same base we cover Downtown, Manial, Zamalek, Abbassia and the Corniche corridor. A project spanning more than one of those can run as a single package.
Garden City streets are narrow and heavily controlled, and many buildings have small original lifts. We record the access route at survey and size panels and deliveries around it, because a sheet that will not fit the lift is a wasted trip. You can also see about Cairo House EG.
What to expect when you work with us
Most washroom packages fail at measurement, not installation. Our process removes that risk before a single panel is cut.
- Site survey. We measure the built washroom in Garden City rather than working from the drawing, because wall plumb, floor level and drainage falls on site rarely match what was issued.
- Layout and panel selection. You receive a cubicle layout with door swings and clear widths marked, plus physical panel samples so the colour is approved under your own lighting instead of on a screen.
- Quotation. Itemised by panel, hardware and installation, so you can see what is being priced and adjust the specification if the budget needs it.
- Fabrication. Panels are cut, edge finished and drilled to the approved layout. Sheets stay under factory film until they reach site.
- Installation. Our fitters set out, install head rails, pilasters and doors, then adjust every hinge and latch before handover. For diplomatic and hospital sites we work inside the security and clinical windows agreed at survey.
- Handover and after sales. We walk the finished washroom with you, hand over spare hardware, and stay reachable for adjustments once the space is in real use.
Find Us on Google Maps
Frequently Asked Questions
Can you provide product documentation for a consultant or embassy submission? Yes. We supply panel samples together with product specification and certification documentation for submission. If a named standard cannot be met we tell you before you commit rather than substituting quietly.
Our building is a converted villa with masonry walls we cannot cut. Is that workable? Yes, and it is one of the strongest arguments for this system. The panels are self supporting, standing on adjustable feet with a head rail, so a cubicle run does not need a stud wall or heavy structural fixings behind it.
Can you work within embassy or hospital security requirements? Yes. We submit crew and vehicle details in advance and work inside the windows you set. This gets agreed at survey stage so the programme we quote is one that fits your access rules.
What finish suits a five star hotel washroom? Muted neutrals and stone textures generally read better than bright commercial colours in that setting. We bring the swatch fan to site so the choice is made against your actual lighting and finishes.
Is compact HPL acceptable for a hospital washroom? Yes. The surface is non porous with no seams or grout lines for growth, and it takes hospital grade disinfectant without dulling or requiring resealing on a maintenance cycle.
What thickness should we specify? 13mm for genuinely public washrooms in hotels, hospitals and mission buildings. 12mm is sufficient for staff only washrooms and small offices, and it costs less.
Is the hardware included in the quotation? Yes. Hinges, indicator locks, brackets, pilaster shoes and coat hooks in stainless steel 304 as one matched set, with spares handed over at completion.
What does a compact HPL partition cost in Garden City? It depends on thickness, colour, cubicle count and hardware, and access constraints can affect installation time. Send the layout and we return an itemised quotation.
Get a quote for your Garden City project
Send the washroom layout or the cubicle count and rough dimensions and we will return an itemised quotation with product documentation attached where you need it.
Site visits across Garden City are arranged around your access and security windows. To get in touch with our team, call or message us any time.
Phone: +201066672094 or +201223111265
Website: cairohouseeg.com
Hours: Open 24 hours, 7 days a week
Address: 3 Misr Lel Tayaran Street, Block 1314, Civil Aviation Buildings, next to Sindbad, El Nozha El Gedida, Cairo 11843