Compact HPL Partitions in Obour City, Cairo
Obour City is built around trade and manufacturing. The Obour wholesale fruit and vegetable market is one of the largest in Egypt and runs almost continuously, the industrial zone carries factories and food production plants, the Egyptian Chinese University sits on the eastern side, and Golf City serves the residential districts. Every one of those runs washrooms under conditions most Cairo buildings never face. Cairo House EG supplies and installs compact HPL partitions across the city.
What compact HPL partitions are, and why Obour facilities need them
Compact HPL is high pressure laminate produced as a solid board rather than a face bonded to a soft core. Kraft paper is saturated in phenolic resin and pressed under heat until it fuses into one dense homogeneous slab, normally 12mm or 13mm for cubicle work. Nothing inside the panel can absorb water and nothing behind it can rust.
Obour asks more of a washroom than an office district does. Food production plants wash down with hot water and strong chemicals as a matter of routine, and the washrooms adjacent to those areas get the same treatment. Anything that relies on a surface coating or a sealed edge is stripped within a year under that regime.
The market and industrial sites add a second problem: continuous use. A wholesale market that trades through the night does not have a quiet period during which a washroom recovers. Cubicles are effectively in permanent service, so the components that wear need to be replaceable in minutes by your own staff rather than requiring a supplier visit.
Panel and hardware specification
| Specification | What we supply for Obour washrooms |
|---|---|
| Panel thickness | 12mm standard cubicles, 13mm for high traffic and public washrooms |
| Core | Solid phenolic kraft core, waterproof through the full thickness |
| Hardware | Stainless steel 304 hinges, indicator locks, brackets, pilaster shoes, coat hooks |
| Door action | Gravity or spring hinges, self closing, adjustable to open or closed rest |
| Head rail | Anodised aluminium, continuous over the cubicle run |
| Floor fixing | Adjustable stainless feet, levels out uneven screed |
| Typical lead time in Obour City | Eight to twelve working days after approval for programme quantities |
| Finishes we move most here | Dark hard wearing solids that hide daily marking in industrial use |
Where compact HPL earns its cost in Obour City
Food production plants
Hygiene wash down with hot water and strong chemicals is routine, and washrooms next to production areas are cleaned to the same standard.
Industrial and manufacturing
Factory staff washrooms across the industrial zone run on shift patterns, effectively in continuous service without a recovery period.
Wholesale market
The Obour market trades through the night, which means public and trader washrooms take use at hours when most facilities are closed.
Logistics and warehousing
Distribution units run staff washrooms in dusty conditions where a non porous wipe clean surface is the only sensible choice.
University
The Egyptian Chinese University campus concentrates heavy use into short breaks between lectures, loading door edges hardest.
Residential and clubs
Golf City and the residential districts run clubhouse and gym facilities that need commercial grade cubicles and lockers.
What we supply and install in Obour City
Cairo House EG has supplied construction finishing materials in Cairo since 2015 and holds the exclusive Egypt agency for UNISCE compact HPL panels. Everything below is fabricated and fitted by our own teams rather than subcontracted out.
Toilet cubicles and urinal screens
Full cubicle runs in 12mm or 13mm compact HPL, with matching urinal divider screens and anodised aluminium head rails. See compact HPL toilet partitions.
Wet area shower enclosures
Shower cubicles that sit in standing water daily without swelling, because the panel is waterproof through its thickness. See shower enclosures in the same panel.
Panel wall lining
Cladding panels for wet walls, corridors and feature walls, fixed on a concealed rail system. See compact wall cladding panels.
Latch hardware
Latch sets that survive constant use and can be swapped out individually rather than as a whole door. See partition latch hardware.
Coat hooks and bumpers
Stainless coat hooks and door bumpers, the two small fittings that decide whether a cubicle feels finished. See washroom coat hooks.
Solid surface vanities
Solid surface vanity units built as one continuous piece, which is the detail that makes a washroom easy to clean. See seamless vanity units.
Serving Obour City and the northeastern corridor
We work from El Nozha El Gedida in Heliopolis, which puts Obour a short run out on the Cairo Belbeis road. It is one of the closer industrial districts to us, which keeps mobilisation costs down on smaller packages.
On the same corridor we cover Shorouk, Badr City, Shoubra El Kheima, Ain Shams and New Nozha. Facilities managers running plants across more than one of those usually hand us the full package.
Industrial sites carry their own access requirements, from gate passes and safety induction to restricted delivery windows and shift working. We collect all of it at survey so the programme we quote is one the site will actually allow. You can also see about Cairo House EG.
What to expect when you work with us
Most washroom packages fail at measurement, not installation. Our process removes that risk before a single panel is cut.
- Site survey. We measure the built washroom in Obour City rather than working from the drawing, because wall plumb, floor level and drainage falls on site rarely match what was issued.
- Layout and panel selection. You receive a cubicle layout with door swings and clear widths marked, plus physical panel samples so the colour is approved under your own lighting instead of on a screen.
- Quotation. Itemised by panel, hardware and installation, so you can see what is being priced and adjust the specification if the budget needs it.
- Fabrication. Panels are cut, edge finished and drilled to the approved layout. Sheets stay under factory film until they reach site.
- Installation. Our fitters set out, install head rails, pilasters and doors, then adjust every hinge and latch before handover. On production sites we phase the work so washroom capacity is never fully withdrawn from a shift.
- Handover and after sales. We walk the finished washroom with you, hand over spare hardware, and stay reachable for adjustments once the space is in real use.
Find Us on Google Maps
Frequently Asked Questions
Our plant washes down with hot water and strong chemicals. Will the panels survive? Yes. There is no surface coating or sealant to strip, and the panel is non porous through its full thickness. This is the environment compact HPL is genuinely designed for rather than merely tolerated in.
We run three shifts. Can you install without withdrawing washroom capacity? Yes. We phase the work so a proportion of cubicles stays in service throughout, and we agree the sequence with your production schedule at survey rather than improvising on site.
Can our own maintenance team replace a broken latch? Yes, and that is how we set the job up. Hinges, latches and brackets are standard stainless steel 304 items that unbolt and swap without touching the panel. We leave spares on site at handover.
Is the material suitable next to a food production area? Yes. Non porous, no seams or grout lines for residue to sit in, and it takes the cleaning chemicals used in food environments without degrading or discolouring.
What thickness should an industrial staff washroom use? 13mm. Continuous shift use is the hardest duty a cubicle sees and the thicker board takes impact at the door edge far better over a long service life.
Do you supply lockers for changing areas as well? Yes, from the same panel with matching stainless fittings, so the changing area and washroom carry one specification and one spares list.
Can you work within gate access, induction and delivery window rules? Yes. We collect the site requirements at survey and submit crew and vehicle details in advance so deliveries are scheduled into the programme.
What does a compact HPL partition cost in Obour City? It depends on thickness, colour, cubicle count and hardware, and volume affects the rate on plant wide packages. Send the washroom schedule and we return an itemised quotation.
Get a quote for your Obour City project
Send the washroom schedule or the plant layout and we will return an itemised quotation covering the whole package. If drawings are incomplete we will survey and produce the layouts.
Site visits to Obour are planned around gate access, induction and shift patterns. To get in touch with our team, call or message us any time.
Phone: +201066672094 or +201223111265
Website: cairohouseeg.com
Hours: Open 24 hours, 7 days a week
Address: 3 Misr Lel Tayaran Street, Block 1314, Civil Aviation Buildings, next to Sindbad, El Nozha El Gedida, Cairo 11843